General Information
Overview: Typically used as a ground attachment point in electrical control cabinets, computer consoles, transformer frames or on any metal fabrication where a common ground (earth) attachment point is required.
Styles Available:
- Push-On Type: Standard 1/4" push-on connector
- Weldable with the Cutlass Classic, Clipper 8, Clipper 10, or equivalent.
- Threaded Type: Enlarged weld base with a large upper contact area for lugs.
- Requires a Clipper 10 or equivalent CD stud welder.
Contact: Call Cutlass for part numbers that are not shown.
Printer-Friendly Documents:
Note: Other diameters, lengths, and materials are available by special order. Minimum quantities may apply.
Select the tab below to view detailed information on each specific part, including diameter, length, material, and corresponding part numbers.
Inches/Metric
Quick Links
| Push on Type | |||||||
|---|---|---|---|---|---|---|---|
| Style | Material | Part No. | A = Thread | ||||
| Single |
Mild Steel (copper plate) |
2931-0001 |
0.032" (0.8mm) |
0.250" (6.35mm) |
0.460" (11.8mm) |
0.375" (9.5mm) |
0.320" (8.2mm) |
| Stainless Steel | 2932-0001 | ||||||
| Aluminum Alloy | 2933-0002 | ||||||
| Double | Mild Steel (copper plate) | 2931-0004 |
0.438" (11.1mm) |
||||
| Stainless Steel | 2932-0004 | ||||||
| Aluminum Alloy | 2933-0004 | ||||||
Interested in this product?
Request a personalized quote today!
Not sure which product you need? Contact us for a free quote.